Grab a 3 x 6 inch His Glory car magnet to show off your spiritual pride as you’re cruising through town looking for the nearest Chick Fila.
APPLICATION PREP FOR YOUR CUSTOM CAR MAGNETS
It is essential to clean the vehicle surface and back of the magnetic material before application. In addition, apply a thin layer of car wax to the vehicle surface and back side of the magnet, especially during the summer months. For car magnets with heavy sun exposure, a slightly heavier coat of wax is recommended during application. A heavier wax coating may help prevent damage from trapped water, dirt, and road chemicals.
How do I apply car magnets?
- Clean car
- Wax car and back of magnet
- Apply Magnet
- Remove weekly, especially before sending your vehicle through a car wash
CAR MAGNET APPLICATION PROCESS
Let one edge of the magnet contact the vehicle in the desired position. Then let the magnetic force work as it positions the sign from starting edge to the opposite edge. If the car magnet is out of place, peel it off and repeat. Do not slide the car magnet to obtain the proper position because any dirt trapped underneath the magnet may damage the vehicle’s surface coating. Ensure your personalized car magnet is smooth against the vehicle with no trapped air underneath. In winter, for conformability purposes, the temperature of the magnet should be a minimum of 50°F, but the temperature of the vehicle surface matters little.
Some surfaces on your car or truck may require special attention. For example, vehicle surfaces that contain factory decals, pinstripes, and molded body panels may cause a separation between the surface and the magnet. Even a thin break between the magnet and vehicle surface may be all that is needed for air flow to get under the magnet and peel it off while driving down the road. We suggest checking these areas every week for the first 90 days.